|
Products from Spain Our Spanish police restraints of the brand mark "Alcyon" are made by Larranaga y Elorza. The brand is called "Fury" in U.S.A. and many models are certified by the "National Institute of Justice" (NIJ). Alcyon handcuffs are sold in more than 50 countries all over the world, were they are used by police forces and security agencies.
ID: A5010
Model 5010 was brought out in May 2005 and is the successor of the famous Alcyon 5050. The most important innovation is the new double locking mechanism. The handcuffs can be securely double locked by inserting the key-thorn into the slot and pushing a little pin in direction of the keyhole. To unlock the double lock, the key has to be turned counter opening direction. The cuffs are made of K-70 steel (nickel finish) and are connected by chain. In each lock are two internal pawls with five teeth each. 25 locking positions are possible varying the inside perimeter from 16.5 cm to 20.0 cm. The handcuff, which fits to most cuffs covers and holsters, complies test of NIJ standard 0307.01. The locking mechanism withstands a compression force of 2200 N. Unfortunately this item is out of stock at the moment. ID: A5050
Alcyon NIJ certified police quality handcuffs. They are made of nickel plated steel and can be securely double locked by small push buttons which are activated by use of the key-pin. To unlock the double lock, the key has to be turned against opening direction. ID: 5050R
Alcyon police quality handcuffs. They are made of nickel plated steel and can be securely double locked by small push buttons which are activated by use of the key-pin. To unlock the double lock, the key has to be turned against opening direction. The cuffs are connected by a rigid steel-bar. The distance between the cuffs is about 2.5 cm. ID: 5050S
This model is equal to model 5050-RIG shown above, except for the surface. The finish is blued (black oxide) instead of nickel plating. Such dark restraints are preferred by special police forces (SWAT-teams) and military units. Unfortunately this item is out of stock at the moment. ID: A5011
Model 5011 was brought out in May 2005 and is the successor of the famous Alcyon 5235. The most important innovation is the new double locking mechanism. The handcuffs can be securely double locked by inserting the key-thorn into the slot and pushing a little pin in direction of the keyhole. To unlock the double lock, the key has to be turned counter opening direction. The cuffs are made of K-70 steel (black oxide finish) and are connected by chain. In each lock are two internal pawls with five teeth each. 25 locking positions are possible varying the inside perimeter from 16.5 cm to 20.0 cm. The handcuff, which fits to most cuffs covers and holsters, complies test of NIJ standard 0307.01. The locking mechanism withstands a compression force of 2200 N. ID: A5235
Alcyon model 5235 is equal to model 5050 shown above, except for the surface. The finish is blued (black oxide) instead of nickel plating. Such dark restraints are preferred by special police forces (SWAT-teams) and military units.
Model 5030 was brought out in May 2005 and is the successor of the famous Alcyon 5230. The most important innovation is the new double locking mechanism. The handcuffs can be securely double locked by inserting the key-thorn into the slot and pushing a little pin in direction of the keyhole. To unlock the double lock, the key has to be turned counter opening direction. The cuffs are made of K-70 steel (nickel finish) and are connected by hoop. In each lock are two internal pawls with five teeth each. 25 locking positions are possible varying the inside perimeter from 16.5 cm to 20.0 cm. The handcuff, which fits to most cuffs covers and holsters, complies test of NIJ standard 0307.01. The locking mechanism withstands a compression force of 2200 N.
This model has an unique feature - an universal hinge, which pivots in all directions. This hinge is even stronger than the usual handcuff-chain. The handcuffs are made of nickel plated steel and can be securely double locked by small push buttons which are activated by use of the key-pin. To unlock the double lock, the key has to be turned against opening direction.
Model 5031 was brought out in May 2005 and is the successor of the famous Alcyon 5236. The most important innovation is the new double locking mechanism. The handcuffs can be securely double locked by inserting the key-thorn into the slot and pushing a little pin in direction of the keyhole. To unlock the double lock, the key has to be turned counter opening direction. The cuffs are made of K-70 steel (black oxide finish) and are connected by hoop. In each lock are two internal pawls with five teeth each. 25 locking positions are possible varying the inside perimeter from 16.5 cm to 20.0 cm. The handcuff, which fits to most cuffs covers and holsters, complies test of NIJ standard 0307.01. The locking mechanism withstands a compression force of 2200 N. Unfortunately this item is out of stock at the moment.
Alcyon model 5236 is equal to model 5230 shown above, except for the surface. The finish is blued (black oxide) instead of nickel plating. Such dark restraints are preferred by special police forces (SWAT-teams) and military units.
Model 5020 was brought out at the beginning of 2006 and is the successor of the famous Alcyon 5232. The most important innovation is the new double locking mechanism. The handcuffs can be securely double locked by inserting the key-thorn into the slot and pushing a little pin in direction of the keyhole. To unlock the double lock, the key has to be turned counter opening direction. The cuffs are made of K-70 steel (nickel finish) and are connected by a single-axis hinge. In each lock are two internal pawls with five teeth each. 25 locking positions are possible varying the inside perimeter from 16.5 cm to 20.0 cm. The handcuff, which fits to most cuffs covers and holsters, complies test of NIJ standard 0307.01. The locking mechanism withstands a compression force of 2200 N. ID: A5021
Model 5021 was brought out at the beginning of 2006 and is the successor of the famous Alcyon 5233. The most important innovation is the new double locking mechanism. The handcuffs can be securely double locked by inserting the key-thorn into the slot and pushing a little pin in direction of the keyhole. To unlock the double lock, the key has to be turned counter opening direction. The cuffs are made of K-70 steel (black oxide finish) and are connected by single-axis hinge. In each lock are two internal pawls with five teeth each. 25 locking positions are possible varying the inside perimeter from 16.5 cm to 20.0 cm. The handcuff, which fits to most cuffs covers and holsters, complies test of NIJ standard 0307.01. The locking mechanism withstands a compression force of 2200 N. Unfortunately this item is out of stock at the moment.
Alcyon model 5232 are very rigid, because once put on, the wrists can be only moved about 90 degrees. The handcuffs can be securely double locked by small push buttons which are activated by use of the key-pin. To unlock the double lock, the key has to be turned against opening direction. The finish is nickel plated. Such dark restraints are preferred by special police forces (SWAT-teams) and military units.
Alcyon model 5233 are very rigid, because once put on, the wrists can be only moved about 90 degrees. The handcuffs can be securely double locked by small push buttons which are activated by use of the key-pin. To unlock the double lock, the key has to be turned against opening direction. The finish is blued (black oxide). Such dark restraints are preferred by special police forces (SWAT-teams) and military units. |